Wedding lighting precautions__Maoming Rongde Lighting Technology Co., Ltd.

The use of spot followers is particularly important. There are several experiences to share with you:
    1. "Follow the spotlight" is a professional stage lighting, which has only been used in wedding scenes in recent years. Follow-light design structure is more complicated than ordinary lights, so users must have pre-job training. So as to avoid accidents and affect the wedding scene.
    2. At present, the follow-up light commonly used by wedding companies is 1200W, and the light source is a chandelier. The starting power is higher than the normal working power. Therefore, the power source should be individually selected for a cable of more than 2.5 square meters to find the field electrician directly from the electric well. Prevent overload tripping of the power supply, and even more serious fire caused by excessive wire liabilities.
    3. Follow-up light must be started and tested before it is officially used, because the built-in transformer follow-up light is now commonly used. When the voltage is insufficient, it will cause the follow-up light to self-check for a long time without starting. So as not to be caught off guard.
    4. How many spotlights should I use at the scene Many friends asked me this way. I think it is better to have more than two. Because the spotlight is a cold light source, the beam of light is not concentrated. The spotlight shines on the object, the contrast between the illuminated surface and the backlight is very large, and there is no way to fill the light in the candlelight wedding scene. Therefore, a spotlight shining on the face of the couple will cause a yin and yang face. Backlighting is the usual time, and the sidelights are all in the ceremony after the stage, which greatly affects the image of the newcomer. If two or more follow lights are lit at the same time, the supplementary light source will not result in the consequences of the appeal.
    5. What should candlelight wedding photographers pay attention to Because wedding companies often use domestic spotlights, most of them do not have thyristor buttons to adjust the brightness of the light source. Therefore, no matter how far away the new light is from the spotlight, the brightness of the light is the same, which caused the photographer to adjust the distance White balance, when the newcomer comes closer, if you do not change to manual zoom, the lens will burst. The candlelight wedding scene has few light sources and the light is not filled. The best model is 3CCD and above, such as SONY190P, SONY digital high-definition, BETCOMA and other models to ensure clear results. At the scene, more than two cameras of the same level must be selected to ensure that the picture is comprehensive and complete. See the specific shooting points in the future-the technical points of the camera photography during the wedding.
    6. Placement and height requirements of the spotlight. If there are two lamps, one is used when a newcomer enters the stage. The other stand is used when the newcomers enter the stage to fill in the lighting and ceremony. If there is a third chasing lamp, it should be placed parallel to the second chasing lamp, and each of them will occupy a corner of the scene. It is advisable that there is no building in front of the lamp. The height of the lamp is more than 2.5 meters, and the lamp head does not directly shine into human eyes. It is advisable to operate the stand on the table. However, it must be ensured that the spotlight rotates left and right without scratching.
    7. Follow-up light equipment use and maintenance precautions. The spotlight is a high-end equipment at the wedding site. The equipment is expensive, bulky, heavy, and complicated to operate, so it must be supervised by someone. Handle it lightly during transportation. There is a special turnover box for the spotlight. The bracket must be firm and stable, and two people must cooperate to complete the light. After turning on the power, turn on the switch and wait for the machine itself to perform a self-test for about 5-8 seconds before the indicator lights up before operating. See the instructions for details. But be sure to stop the car for more than 10 minutes from the last shutdown to the next start. Do not switch frequently, the bulb is easy to burn out. An ordinary bubble needs at least 120 yuan (produced by Dandong). When replacing the lamp, wait for the machine to cool down before proceeding. Do not touch the glass in the middle of the bulb with your hand. Press firmly. The vent of the lamp body should be clear to avoid affecting the heat dissipation!

Prev：The definition, function and comment of stage lighting

Next：Chinese stage film and television lighting prospects

Product search